Structural Asymmetry in two Thallium-based Alloys: Tl-Mg and Tl-Na

Authors

DOI:

https://doi.org/10.3126/jist.v29i1.53511

Keywords:

Ordering, segregating, surface segregation, thermodynamic properties

Abstract

Different modelled equations are used to analyze the variation of the thermodynamic, microscopic and surface characteristics between the Tl-Mg and Tl-Na liquid alloys at 1000 K by considering TlNa2 and TlMg2 complexes. The Thermodynamic properties are studied under Quasi-Chemical Approximation and the agreement between theoretical and experimental results of thermodynamic properties about their melting temperatures verifies the validity of model. The transport and surface properties of the alloys are studied by Kaptay and Butler models respectively. From the theoretical observations, it is shown that the Tl-Mg alloy is more interacting than that of the Tl-Na alloy and exhibits an ordering nature below 0.3 concentration of Tl, but above this concentration Tl-Na alloy shows more ordering tendency. The Tl-Mg has a higher viscosity than the Tl-Na alloy within whole concentration of Tl.  On the basis of surface properties, Na segregates on the surface within entire concentration of Tl in Tl-Na alloy whereas Mg segregates on the surface below 0.35 concentration of Tl in Tl-Mg alloy.

Downloads

Download data is not yet available.
Abstract
28
PDF
9

References

Akhbari, K., & Morsali, A. (2010). Thallium (i) supramolecular compounds: Structural and properties consideration. Coordination Chemistry Reviews, 254(17-18), 1977-2006. https://doi.org/10.1016/j.ccr.2010.03.006

Awe, O.E. (2018). Thermodynamic investigation of thermophysical properties of thallium-based liquid alloys. Physics and Chemistry of Liquids, 57(3), 296-310. https://doi.org/10.1080/00319104.2018.1443453

Bhandari, I.B., Panthi, N., Koirala, I., & Adhikari, D. (2021). Phase segregating and complex forming Pb-based (= X-Pb) liquid alloys. Phase Transitions, 94(5), 338-352. https://doi.org/10.1080/01411594.2021.1933485

Bhatia, A., & Singh, R. (1982). Thermodynamic properties of compound forming molten alloys in a weak interaction approximation. Physics and Chemistry of Liquids an International Journal, 11(4), 343-351. https://doi.org/10.1080/00319108208080755

Bhatia, A., & Thornton, D. (1970). Structural aspects of the electrical resistivity of binary alloys. Physical Review B, 2(8), 3004. https://doi.org/10.1103/PhysRevB.2.3004

Brackbill, J.U., Kothe, D.B., & Zemach, C. (1992). A continuum method for modeling surface tension. Journal of Computational Physics, 100(2), 335-354. https://doi.org/10.1016/0021-9991(92)90240-Y

Brandes, E.A., & Brook, G. (2013). Smithells metals reference book. Elsevier.

Budai, I., Benkő, M.Z., & Kaptay, G. (2007). Comparison of different theoretical models to experimental data on viscosity of binary liquid alloys. Materials Science Forum, 537, 489-496. https://doi.org/10.4028/www.scientific.net/MSF.537-538.489

Butler, J.A.V. (1932). The thermodynamics of the surfaces of solutions. Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 135(827), 348-375. https://doi.org/10.1098/rspa.1932.0040

Cowley, J. (1950). An approximate theory of order in alloys. Physical Review, 77(5), 669. https://doi.org/10.1103/PhysRev.77.669

Guggenheim, E. (1952). Mixtures. Oxford University Press.

Habashir, F. (1998). Secondary metals and miscellaneous alloys. Alloys: preparation, properties, applications. New York (NY): Wiley-VCH, 283-302. https://doi.org/10.1002/9783527611935.ch17

Hultgren, R., Desai, P.D., Hawkins, D.T., Gleiser, M., & Kelley, K.K. (1973). Selected values of the thermodynamic properties of binary alloys (Tech. Rep.). National Standard Reference Data System.

Iida, T. (1994). Physical properties of liquid metals [IV] surface tension and electronic transport properties of liquid metals. Welding International, 8(10), 766-770. https://doi.org/10.1080/09507119409548692

Jha, I., Khadka, R., Koirala, R., Singh, B., & Adhikari, D. (2016). Theoretical assessment on mixing properties of liquid Tl-Na alloys. Philosophical Magazine, 96(16), 1664-1683. https://doi.org/10.1080/14786435.2016.1177668

Kaptay, G. (2005). A method to calculate equilibrium surface phase transition lines in monotectic systems. Calphad, 29(1), 56-67. https://doi.org/10.1016/j.calphad.2005.04.004

Kaptay, G. (2005). A unified equation for the viscosity of pure liquid metals. International Journal of Materials Research, 96(1), 24-31. https://doi.org/10.3139/146.018080

Kaptay, G. (2008). A unified model for the cohesive enthalpy, critical temperature, surface tension and volume thermal expansion coefficient of liquid metals of bcc, fcc and hcp crystals. Materials Science and Engineering: A, 495(1-2), 19-26. https://doi.org/10.1016/j.msea.2007.10.112

Koirala, I. (2018). Chemical ordering of Ag-Au alloys in the molten state. Journal of Institute of Science and Technology, 22(2), 191-201. https://doi.org/10.3126/jist.v22i2.19612

Li, H., Sun, X., & Zhang, S. (2014). Calculation of thermodynamic properties of Cu-Ce binary alloy and precipitation behavior of Cu6 ℎ . Materials Transactions, 55(12), 1816-1819. https://doi.org/10.2320/matertrans.M2014319

Novakovic, R., Ricci, E., Gnecco, F., Giuranno, D., & Borzone, G. (2005). Surface and transport properties of Au-Sn liquid alloys. Surface Science, 599(1-3), 230-247. https://doi.org/10.1016/j.susc.2005.10.009

Panthi, N., Bhandari, I., & Koirala, I. (2021). Complex formation of sodium-mercury alloy at molten state. Journal of Physics Communications, 5(8), 085005. https://doi.org/10.1088/2399-6528/ac1733

Panthi, N., Bhandari, I., Pangeni, R., & Koirala, I. (2020). High temperature assessment of K-Tl binary liquid alloy. Journal of Nepal Physical Society, 6(2), 20-25. https://doi.org/10.3126/jnphyssoc.v6i2.34850

Singh, B., Koirala, I., Jha, I., & Adhikari, D. (2014). The segregating nature of Cd-Pb liquid binary alloys. Physics and Chemistry of liquids, 52(4), 457-470. https://doi.org/10.1080/00319104.2013.871668

Singh, R. (1987). Short-range order and concentration fluctuations in binary molten alloys. Canadian Journal of Physics, 65(3), 309-325. https://doi.org/10.1139/p87-038

Warren, B. (1969). X-ray diffraction: Courier corporation. North Chelmsford MA, USA.

Downloads

Published

2024-07-12

How to Cite

Panthi, N., Bhandari, I. B., & Koirala, I. (2024). Structural Asymmetry in two Thallium-based Alloys: Tl-Mg and Tl-Na. Journal of Institute of Science and Technology, 29(1), 25–33. https://doi.org/10.3126/jist.v29i1.53511

Issue

Section

Research Articles