Experimental investigation on anisotropic surface properties of crystalline silicon

Authors

  • Shobha Kanta Lamichhane Department of physics, Prithvi Narayan Campus, Pokhara

DOI:

https://doi.org/10.3126/bibechana.v8i0.4828

Keywords:

microfabrication, activation energy, concentration, anisotropy, crystal plane

Abstract

Anisotropic etching of silicon has been studied by wet potassium hydroxide (KOH) etchant with its variation of temperature and concentration. Results presented here are temperature dependent etch rate along the crystallographic orientations. The etching rate of the (111) surface family is of prime importance for microfabrication. However, the experimental values of the corresponding etch rate are often scattered and the etching mechanism of (111) remains unclear. Etching and activation energy are found to be consistently favorable with the thermal agitation for a given crystal plane. Study demonstrate that the contribution of microscopic activation energy that effectively controls the etching process. Such a strong anisotropy in KOH allows us a precious control of lateral dimensions of the silicon microstructure.

Keywords: microfabrication; activation energy; concentration; anisotropy; crystal plane

DOI: http://dx.doi.org/10.3126/bibechana.v8i0.4828  

BIBECHANA 8 (2012) 59-66  

Downloads

Download data is not yet available.
Abstract
605
PDF
537

Downloads

Published

2012-01-15

How to Cite

Lamichhane, S. K. (2012). Experimental investigation on anisotropic surface properties of crystalline silicon. BIBECHANA, 8, 59–66. https://doi.org/10.3126/bibechana.v8i0.4828

Issue

Section

Research Articles