Design and development of low-range frequency modulated signal (F.M.) transmitter

Authors

  • Abhishek Shrivastava Mtech Student, Department of ECE, Jaypee Institute of Information Technology, NOIDA(U.P.) INDIA

DOI:

https://doi.org/10.3126/bibechana.v15i0.18279

Keywords:

Inductor, LC oscillator, Telescopic antenna, 2N3904 bipolar transistor

Abstract

Frequency Modulated (FM) signal transmitter is a small device that can transmit Frequency Modulated signal over short range. [1] This document consists of most simple and economical technique for building a FM transmitter using basic electronic components like resistor, capacitor, inductor etc. The FM transmitter receives human voice signals though microphone. It further amplifies it, modulate it over carrier and finally transmit it. Assuming favorable conditions, output of transmitter can be received by anyone who tunes it in frequency of our transmitter. Here, I have described Circuit diagram, its working, components required, uses of various components in our circuit, its practical applicability. The design is simulated using NI Multisim and is further implemented on bread-board. This design is capable of transmitting signal for distance of radius 20m, tuned at 97.1 MHz One could clearly hear sound produced at microphone of transmitter.

BIBECHANA 15 (2018) 30-36

Downloads

Download data is not yet available.
Abstract
1290
PDF
1568

Downloads

Published

2017-12-19

How to Cite

Shrivastava, A. (2017). Design and development of low-range frequency modulated signal (F.M.) transmitter. BIBECHANA, 15, 30–36. https://doi.org/10.3126/bibechana.v15i0.18279

Issue

Vol. 15 (2018)

Section

Research Articles

License

This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.