Studying the Performance and Kinetic Values for Pollutant Removal Using Lab Scale Plant
DOI:
https://doi.org/10.3126/kuset.v14i1.63462Keywords:
Activated sludge process, Solid retention time, Wastewater treatment plant, Kinetic coefficient, Laboratory scale plantAbstract
The present study aimed at determining performance and pollutant removal kinetics in the treatment of wastewater using a laboratory-scale continuous flow stirred tank reactor (CFSTR) based on activated sludge process (ASP). The waste activated sludge from the Guheshwori Wastewater Treatment Plant (WWTP) is used as a start-up seed sludge. The CFSTR is operated at varying solid retention time (SRT) of 1, 2, 3, 5, 7.5 and 10 days using synthetic wastewater prepared daily as an influent. Chemical Oxygen Demand (COD) and Total Kjeldahl Nitrogen (TKN) of the influent, effluent and Mixed Liquor Volatile Suspended Solids (MLVSS) of aeration tank are analyzed at various SRT to determine the respective kinetic coefficients. The COD and TKN removal increased with increasing SRT. The kinetic coefficients; maximum substrate utilization rate (k), the half velocity constant (Ks), cell yield coefficient (Y ) and decay coefficient (kd) have been found to be 1.61 g COD/g VSS · day, 87.22 mg/L, 0.50 g Volatile Suspended Solid (VSS)/g COD and 0.07 day-1 respectively for synthetic wastewater. Similarly, k, Ks, Y and kd for the treatment of wastewater from Guheswori WWTP have been observed to be 1.86 g COD/g VSS.day, 107.77 mg/L, 0.32 g VSS/g COD and 0.04 day-1.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.