Design and Fabrication of Animal Waste Cleaning Machine

Authors

  • Laxmi Parajuli Department of Mechanical and Automobile Engineering, Tribhuvan University, Institute of Engineering, Pashchimanchal Campus Pokhara – 16, Lamachaur, Nepal
  • Samundra K.C. Department of Mechanical and Automobile Engineering, Tribhuvan University, Institute of Engineering, Pashchimanchal Campus Pokhara – 16, Lamachaur, Nepal
  • Saroj Paudel Department of Mechanical and Automobile Engineering, Tribhuvan University, Institute of Engineering, Pashchimanchal Campus Pokhara – 16, Lamachaur, Nepal
  • Subash Khatri Department of Mechanical and Automobile Engineering, Tribhuvan University, Institute of Engineering, Pashchimanchal Campus Pokhara – 16, Lamachaur, Nepal
  • Surakshya Neupane Department of Mechanical and Automobile Engineering, Tribhuvan University, Institute of Engineering, Pashchimanchal Campus Pokhara – 16, Lamachaur, Nepal

DOI:

https://doi.org/10.3126/kuset.v15i2.63357

Keywords:

Dairy farming, Animal dung, Chain drive mechanism, Animal waste cleaning machine, DC motor

Abstract

Cleaning is an essential and unavoidable part of life, and cleaning animal shed waste is a time-consuming activity that may be better spent on something more productive. During discussions with dairy farmers in Nepal, it became evident that animal waste collecting equipment was required. One of the primary reasons for this requirement is labor scarcity, which is caused by employees’ dislike of picking and collecting animal dung manually. Animal waste cleaning machine provides a strategy for collecting animal dung and cleaning the space without putting people in close contact with the dung. A chain drive mechanism is used in this machine. The dung is collected with the help of picker/rubber pads that are welded to the chain, then dropped into the collector, and the process is repeated. The chain is coupled to a 12V battery-powered dc motor. The machine is cost-effective and saves time by reducing human labor. It may also be utilized as a stand-alone device in remote areas.

Downloads

Download data is not yet available.
Abstract
27
PDF
13

Downloads

Published

2021-08-30

How to Cite

Parajuli, L., K.C., S., Paudel, S., Khatri, S., & Neupane, S. (2021). Design and Fabrication of Animal Waste Cleaning Machine. Kathmandu University Journal of Science, Engineering and Technology, 15(2). https://doi.org/10.3126/kuset.v15i2.63357

Issue

Vol. 15 No. 2 (2021)

Section

Original Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.