Effect of Silt Size, Concentration on Erosion of Turgo Turbine Blades

Authors

  • Sourabh Khurana School of Engineering and Technology, Shoolini University
  • Varun Goel Department of Mechanical Engineering at NIT
  • Khushmeet Kumar School of Engineering and Technology , Shoolini University
  • Muneesh Sethi School of Engineering and Technology , Shoolini University

DOI:

https://doi.org/10.3126/hn.v13i0.10060

Keywords:

Silt size, Silt concentration, Correlation, Nozzle angle, Normalized wear

Abstract

An experimental investigation in actual flow conditions has been carried out to study the effect of silt size, concentration, jet velocity, operating hours and nozzle angle on erosive wear of Turgo impulse turbine blades. Experiments have shown that maximum erosion occurs at nozzle angle of 20ο for silt size 370 μm and silt concentration of 12000 ppm. During the experiments it has been observed that erosive wear depends on silt size, silt concentration, nozzle angle and operating hours of turbine. A correlation has also been developed as a function of silt size, silt concentration, operating hours of turbine and nozzle angle. 

DOI: http://dx.doi.org/10.3126/hn.v13i0.10060

HYDRO NEPAL Journal of Water, Energy and Environment

Issue No.13, July 2013

Page: 

Uploaded Date: 03-14-2014

Downloads

Download data is not yet available.
Abstract
836
PDF
1622

Author Biographies

Sourabh Khurana, School of Engineering and Technology, Shoolini University

Assistant Professor

Varun Goel, Department of Mechanical Engineering at NIT

Assistant Professor

Khushmeet Kumar, School of Engineering and Technology , Shoolini University

Assistant Professor

Muneesh Sethi, School of Engineering and Technology , Shoolini University

Assistant Professor

Downloads

Published

2014-03-13

How to Cite

Khurana, S., Goel, V., Kumar, K., & Sethi, M. (2014). Effect of Silt Size, Concentration on Erosion of Turgo Turbine Blades. Hydro Nepal: Journal of Water, Energy and Environment, 13, 72–75. https://doi.org/10.3126/hn.v13i0.10060

Issue

Vol. 13 (2013)

Section

Articles

License

The copyright of the articles and papers published is held by HYDRO Nepal Journal.

The views and interpretation in this journal are those of author(s), and HYDRO Nepal does not bear any responsibility for the views expressed by authors in the journal.